15Sep 2018

StudioRIP DTP 24/36 is a CTP (Computer to Plate) system that uses an inkjet printer for producing offset plates. Unlike most inkjet CTP systems, the plates produced by the DTP system are conventional UV plates that look and behave in the same way as any film masked conventional plate does, but its costs are much smaller (similar to thermal CTP costs). Similarly, the cost of the new, warranty covered equipment is a fraction of a laser CTP’s price. Although the DTP plates are conventional, they have an additional inkjet coating (similar to what photo papers have) applied in the factory over the photosensitive layer. The DTP plates are available for sale from local StudioRIP dealers, from StudioRIP SRL, or for dealers directly from StudioRIP’s Chinese representative.

banner03b

Descargar folleto informativo Sistema DTP

The production process is as follows:

  1. Obtain the conventional plates with inkjet coating from your local dealer (or from StudioRIP SRL). The plates come in sealed boxes from the factory.
  2. Align the plate on the front tray to the 3 positioning pins which are automatically activated by the sensors when the plate has the proper position, then let the printer load the plate.
  3. The printer writes the image with black ink in about 7 minutes for a 510 × 400 mm plate (larger plates print in proportionally more time).
  4. The printed plate is exposed by the UV LEDs in the upper drawer, the exposure time being controlled by the system.
  5. Place the plate into the vertical washing tank of the plate processor using the plate holder frame. The ink and the coating are washed off by the running water. The plates can also be washed in a conventional plate washer under a jet of water.
  6. Move the washed plate into the developer tank, where the chemicals are recirculated.
  7. Move the processed plate into the washing tank again.
  8. Finally move the plate into the drying slot. All processing stages are controlled by the system.
  9. The plate can be used by the printing press. It will behave like any other conventional plate.
15Sep 2018

Sorry, this entry is only available in European Spanish. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.

EPSON presenta este mes los nuevos modelos de la serie SureColor SC-T: impresoras de gran formato de suelo o escritorio para impresión técnica de alta calidad.

Hoy en día, todas las empresas pueden disponer de una impresora de gran formato de Epson. Las nuevas impresoras de alto rendimiento de la gama SureColor™ SC-T con soporte y de escritorio convierten la creación de impresiones a gran escala en una tarea fácil y asequible para empresas de todos los tamaños. Con la tecnología del cabezal de impresión PrecisionCore, no se
produce pérdida de calidad ni de detalles por cabezales bloqueados, incluso en el caso de usuarios ocasionales. Es la solución perfecta para reducir costes cuando se lleva a cabo la producción de impresiones interna por primera vez.

banner02b

Descargar Folleto Nuevas impresoras gran formato SureColor serie T

  • Tecnología PrecisionCore

    El control preciso de la forma y el volumen de las gotas a un ritmo de hasta 50 000 gotas por segundo se traduce en una calidad de producción profesional e increíblemente detallada a alta velocidad.

    Diseñada para ofrecer exactitud y precisión
    Los cabezales de impresión Micro Piezo proporcionan una precisión sorprendente en texto negro, gráficos en color e imágenes.

  • Tamaño reducido
    El diseño sencillo y compacto se adapta a la perfección a casi todos los entornos. Los modelos SC-T3100 y SC-T5100 disponen de soportes extraíbles para poder utilizarlos en el escritorio.
    La unidad sellada crea una superficie plana para conseguir espacio de trabajo adicional.

    Mayor velocidad en la primera impresión
    2,4 páginas A1 por minuto y sin tiempo de espera entre ellas.
    Impresión directa desde los dispositivos
    Impresión wifi mediante dispositivos compatibles y aplicaciones que admitan Wi-Fi Direct, así como Apple AirPrint™.

  • Tecnología NVT
    La exclusiva tecnología de verificación de inyectores (NVT) y la protección contra el polvo evita impresiones erróneas, incluso en caso de uso ocasional.

    Coste total de propiedad (TCO)
    Desde el precio de compra hasta los consumibles y el mantenimiento. Los cabezales de impresión forman parte de la impresora y tienen la misma vida útil que la unidad. Una gran variedad de tamaños de cartuchos de tinta para producir economías de escala.

    Garantía
    Garantía estándar de 12 meses in situ y ampliación de garantía CoverPlus opcional disponible para 3, 4 o 5 años.

  • Impresoras de gran formato de suelo o escritorio con el tamaño más reducido de la gama y superficies planas ideales cuando el espacio es esencial. Son perfectas para trabajos de impresión diarios en gran formato o simplemente cuando sean necesarias.
    Conectividad de red, incluida la impresión wifi mediante dispositivos compatibles con Wi-Fi Direct y Apple AirPrint™.
    Descargar surecolor-sc-t3100-datasheet
    Descargar surecolor-sc-t3100n-datasheet
    Descargar surecolor-sc-t5100-datasheet
    Descargar surecolor-sc-t5100n-datasheet
  • Impresoras de gran formato de suelo o escritorio para impresión técnica de alta calidad a un coste relativamente bajo.
    Resultados sorprendentemente detallados a altas velocidades. Los cartuchos de tinta de mayor capacidad (hasta 350 ml) proporcionan economías de escala.
    Conectividad de red, incluida la impresión wifi, mediante dispositivos compatibles con Wi-Fi Direct y Apple AirPrint™.
    Descargar surecolor-sc-t3400-datasheet2
    Descargar surecolor-sc-t3400n-datasheet
    Descargar surecolor-sc-t5400-datasheet

 

01Dec 2015

The process of standardization in the printing industry is far from being complete. There are still professionals who are unaware of the benefits they can get from having their workshops working under standars or if the effort will be worth, and more in these times in which we must optimize the resources at our disposal .

SolidaColor want to help you to evaluate this decision; so we offer the following basic hints about the ISO 12647 standard

If you want more information on methods, deadlines, costs, etc. to implement the standard in your workshop, we encourage you to contact us.
Continue reading

20Nov 2015

EFI™ is pleased to announce the release of Fiery® XF and Fiery proServer 6.2.2.

This latest release is available to all customers with their Fiery XF or Fiery proServer software covered under an EFI Software Maintenance & Support Agreement (SMSA), or an Enhanced Service Program (ESP) at no additional charge.

fiery_xf_622

What’s New

  • 11 new supported printers

New printer drivers for EFI VUTEk, EPSON, HP and OKI devices join the 700+ printers already supported by Fiery XF and Fiery proServer.

To see the full list of supported printers visit here.

  • Mac OS X 10.11 compatibility

The Fiery XF 6.2.2 Client, Server, Unidriver and all included tools support Mac OS X 10.11, El Capitan.

  • New ISO 12647-2 reference support

Support for two new ISO 12647-2 reference profiles, Fogra 51 and 52 characterization data sets, plus four new workflow templates to support this updated standard.

 

Fiery XF and Fiery proServer 6.2.2 Technical Overview Video. 

Please note: The 6.2.2 online updater requires Fiery XF 6.2 or 6.2.1 to be the currently installed version.

20Nov 2015

X-Rite builds and services color measurement instruments in an environment that adheres to the highest standards and strictest tolerances.

But users also have a responsibility in ensuring that their color measurement instruments live up to the X-Rite promise.

Here are some tips that will help you protect your investment:

  1. Keep your device clean. Measuring with a dirty device is like driving with a cloudy windshield…not recommended if you want to get accurate and consistent readings. Your spectrophotometer’s user manual includes best practices for cleaning. Follow these carefully, because cleaning your device in the wrong way could void your warranty. A good rule of thumb is to never use anything harsh or abrasive in the cleaning process.
  2. Keep your samples and targets clean. If you measure dirty samples, your color data won’t be accurate. Plus, you’ll contaminate your measurement device and transfer that contamination to every other sample you measure.
  3. Calibrate regularly. Calibration brings your device back to its original factory settings. To maintain accuracy, you should calibrate each time you start a job, and at least once a day. The longer you go without calibrating, the harder it will be for your device to bring itself back into a calibrated state.
  4. Use NetProfiler to optimize and certify the measurement performance of your spectrophotometers on a regular basis, and align multiple instruments with each other to ensure consistent measurement data.
  5. Follow scheduled maintenance recommendations. Just like your car, you must follow the scheduled maintenance plan to keep your device in good working condition. Factory certification will give you – and your customers – confidence that your instrument is reading and performing the way it should. We recommend factory recertification once a year.
02Oct 2015

La impresión de fotolitos en el RIP EFI Fiery XF 5.0 es una tarea realmente sencilla. Con el soporte de impresión adecuado y con el potente motor generador de tramas de este software, podemos imprimir auténticos fotolitos para generar después nuestras planchas, clichés o pantallas, olvidándonos por completo de las complicaciones del antiguo sistema de revelado analógico, con sus procesadoras, limpiezas, liquidos que se estropean y que hay que procesar como residuo industrial, etc… Continue reading